Sissy bar
#21
I've got the same one as above but I don't believe mine is as tall. I bought it so my girlfriend doesn't have to squeeze the **** out of me anymore when riding. When I get time I want to get another set of detatchable side plates and fab up one out of twisted square stock.
#22
#23
#28
Hi All,
I'm pretty new over here, but have been following the posts from a while now. First of all sorry to bring this long lost thread up, but i need some information reagrding sissy bar.
I recently bought a 2015 Iron 883 and want to install the Tall sissy bars. However i have few doubts as mentioned below:-
1. If i go for the tall sissy bar (product ID - 52300040), do i need to buy side mount plates for this(I think its one peice and does not require side mount plates.
2. Do i need to relocate the turn signal indicators (as told by one of my friend)?
You advice on my query will be greatly appreciated. Thanks
I'm pretty new over here, but have been following the posts from a while now. First of all sorry to bring this long lost thread up, but i need some information reagrding sissy bar.
I recently bought a 2015 Iron 883 and want to install the Tall sissy bars. However i have few doubts as mentioned below:-
1. If i go for the tall sissy bar (product ID - 52300040), do i need to buy side mount plates for this(I think its one peice and does not require side mount plates.
2. Do i need to relocate the turn signal indicators (as told by one of my friend)?
You advice on my query will be greatly appreciated. Thanks
#29
Hi All,
I'm pretty new over here, but have been following the posts from a while now. First of all sorry to bring this long lost thread up, but i need some information reagrding sissy bar.
I recently bought a 2015 Iron 883 and want to install the Tall sissy bars. However i have few doubts as mentioned below:-
1. If i go for the tall sissy bar (product ID - 52300040), do i need to buy side mount plates for this(I think its one peice and does not require side mount plates.
2. Do i need to relocate the turn signal indicators (as told by one of my friend)?
You advice on my query will be greatly appreciated. Thanks
I'm pretty new over here, but have been following the posts from a while now. First of all sorry to bring this long lost thread up, but i need some information reagrding sissy bar.
I recently bought a 2015 Iron 883 and want to install the Tall sissy bars. However i have few doubts as mentioned below:-
1. If i go for the tall sissy bar (product ID - 52300040), do i need to buy side mount plates for this(I think its one peice and does not require side mount plates.
2. Do i need to relocate the turn signal indicators (as told by one of my friend)?
You advice on my query will be greatly appreciated. Thanks
the installation instructions. It appears that no turnsignal relocation
is necessary. You do not need sideplates either because they are
built into the bar (see picture from link above).
hope this helps,
T.
#30
If you go here you can see a picture of the bar as well as download
the installation instructions. It appears that no turnsignal relocation
is necessary. You do not need sideplates either because they are
built into the bar (see picture from link above).
hope this helps,
T.
the installation instructions. It appears that no turnsignal relocation
is necessary. You do not need sideplates either because they are
built into the bar (see picture from link above).
hope this helps,
T.
Thread
Thread Starter
Forum
Replies
Last Post
kyle76
Sportster Models
3
01-27-2016 11:33 AM